If you have a heat issue we have an insulation material that will solve your problem. Check our complete line of insulating materials to find the product that’s right for you. Remember that relective surfaces are meant to face the heat source to reflect radiant heat. If your trying to keep heat out of the driver compartment try to control it before it gets into the interior.
*Floor and Tunnel Shield
This revolutionary material adds a new dimension to control heat with minimal clearance needed, only 3/16”! The Floor and Tunnel Shield is constructed utilizing an embossed 10mm aluminum face bonded to a 1/8” composite fiberglass insulation and is backed with an aggressive adhesive that holds past 450º F. Capable of handling direct temperatures up to 1750º F. Tough enough for under vehicle applications. This unique material can also block out up to 50% of unwanted road noise.
*Heat Screen Radiant Matting
Heat Screen is capable of withstanding direct heat up to 1000º F. on one side, while protecting against radiant heat up to 2000º F. on the aluminized side. Heat Screen can be used to protect the driver’s compartment from excess heat; to protect areas where excessive heat can blister paint; where exhaust pipes run close to the fuel tank; and many other applications too numerous to mention. This material can be applied with a high temperature adhesive, or fastened down with screws or rivets.
*Reflect-a-Cool
Reflect-A-Cool is a sheet of reflective material with an adhesive back which offers outstanding protection against extreme heat. A combination of fiberglass and an aluminized layer of reflective foil, Reflect-A-Cool is ideal for firewalls, marine engine bays, RV “dog house” or in the tub of a racecar where typical mechanical fasteners cannot be used. Reflect-A-Cool will reflect up to 1000º F. and will protect against a direct continuous temperature of 400º F.
*Cool Tape
Cool-Tape consists of a 1mm aluminized material bonded to a light weight, woven fiberglass with super strong adhesive backing and release liner. Cool-Tape can reflect up to 1500º F of radiant heat. The uses are limited only by your imagination but common uses include wrapping wires or fuel lines and sealing openings in floor boards or firewalls. This is the finest heat shielding tape on the market.
*Heat Resistant Sealant/Adhesive
This is the best product to install our Heat Screen, but the uses are limitless. Anytime you need to bond or seal around heat this is the product for you. Dow Corning developed this product for the extreme conditions faced by the aerospace industry. Use on fiberglass, metal, wood, rubber & plastic. Peel strength of 20 lbs. Performs continuously at 85 to 500º F.